<label id="vvuij"></label>
    <dfn id="vvuij"><xmp id="vvuij"><menu id="vvuij"></menu>
      <mark id="vvuij"></mark>

      <rt id="vvuij"></rt><span id="vvuij"></span>

      <li id="vvuij"></li>
      1. <small id="vvuij"><progress id="vvuij"><listing id="vvuij"></listing></progress></small>





        Tetrahydrofuran

        Physical and chemical properties

        Color and odor status: colorless, viscous liquid with the smell similar to ether

        Toxicity: low toxicity

        Flammability: extremely flammable

        Density: 0.887g/cm3

        Volatility: volatile

        Boiling point: 66 ℃

        Stability: stable

        Melting point: -108.5℃

        Acidity: weak acid

        Spontaneous ignition point: 321

        Stickiness: small

        Flash point: -14℃

         

        Solubility: soluble in most organic solvents such as water, ethanol, ether, acetone and benzene.

        Code

        CAS: 109-99-9

        HS: 2932110000

        EINECS: 203-726-8

        Uses

        Used as a solvent, organic synthesis, medicine, and has a wide range of Uses. Used as a chromatographic analysis reagent and an intermediate for the synthetic pesticide phenbutyltin. It can be directly used to make synthetic fibers, synthetic resins, and synthetic rubbers. It is also a solvent for many polymer materials, precision tapes and electroplating industries. It is also used to make adiponitrile, adipic acid, hexamethylene diamine, succinic acid, butanediol, etc. Tetrahydrofuran is an important organic synthesis raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC and butyl aniline. It is widely used as surface coatings, solvent for anticorrosive coatings, printing inks, tape and film coatings, and used as reaction solvents.

        Hazard category

        3.1 Class flammable chemicals

        Fire-fighting measures

        Hazardous characteristics: It can react with acids. Reacts violently with potassium hydroxide and sodium hydroxide. Its vapor is heavier than air and can spread to a considerable distance in a lower place, and will ignite when it encounters a fire source.

        Extinguishing method: use foam, carbon dioxide, dry powder, sand to extinguish the fire. Fire with water is ineffective. Spray water to cool the container. If possible, move the container from the fire scene to an open place. If the container in the fire scene has changed color or produces sound from the safety relief device, it must be evacuated immediately.

        Emergency treatment

        Skin contact: Take off contaminated clothing, rinse the skin thoroughly with soap and water

        Eye contact: Lift the eyelid, rinse with running water or normal saline, and seek medical attention

        Inhalation: quickly leave the scene to a place with fresh air. Keep the airway open. If breathing is difficult, give oxygen and seek medical attention

        Ingestion: Drink enough warm water, induce vomiting, seek medical attention

        Packaging, storage, transportation

        Packed in galvanized iron drum, 180kg/drum, stored in a cool, ventilated warehouse, away from fire and heat sources. The storage temperature should not exceed 30 ℃. The packaging must be sealed and not in contact with air. Use explosion-proof lighting and ventilation facilities. It is forbidden to use mechanical equipment and tools that easily generate sparks.

         




          Previous product: Dipropylene glycol (DPG)
          Next product: Methylal

        狼人青草久久网伊人,无码色欲色欱www在线,久久国产厕所拍精品盗摄,国产思思精品视频
        <label id="vvuij"></label>
          <dfn id="vvuij"><xmp id="vvuij"><menu id="vvuij"></menu>
            <mark id="vvuij"></mark>

            <rt id="vvuij"></rt><span id="vvuij"></span>

            <li id="vvuij"></li>
            1. <small id="vvuij"><progress id="vvuij"><listing id="vvuij"></listing></progress></small>